[cisco-voip] PRI Error

[Ryan Ratliff]

Have you made more than 1 call at a time to see if it goes to channel  
29 for the second call?

What is the behavior you expect?

-Ryan

On Nov 5, 2007, at 8:22 AM, Sechaba Mokoena wrote:

Hi,



I’m having a problem with my PRI, each time a called is placed  
channel 30 is always selected. I have called the Telco to test the  
circuit, but they claim the circuit is fine. Is there anything I can  
check whilst debugging to prove that the root of this problem is not  
caused by my equipment.



Best regards,



Sechaba Mokoena

Systems Engineer

Bytes Technology Group - Systems Integration


Tel : (+27) (11) 205-7000 |  Fax: (+27) (11) 205-7584  |  Cell :  
(+27) 84 798-6803 | msn:sechaba.mokoena at hotmail.com
Web  : www.btgroup.co.za  |  Press Office : www.itweb.co.za/office/ 
bytes   |   Licensing : www.purelicensing.co.za



Bytes Systems Integration (Pty) Ltd : Registration No: 1995/012031/07
A subsidiary of Bytes Technology Group SA (Pty) Ltd,   In association  
with KAGISO
P O Box 5905, Halfway House, 1685, Midrand;  Bytes Business Park,  
Block B, 241 Third Road, Halfway Gardens, Midrand, South Africa

E-Mail Disclaimer: http://www.altron.co.za/email.asp or phone: (+27)  
(11) 205-7000




The information contained in this message and or attachments is  
intended only for the person or entity to which it is addressed and  
may contain confidential and/or privileged material.  Any review,  
retransmission, dissemination or other use of, or taking of any  
action in reliance upon, this information by persons or entities  
other than the intended recipient is prohibited. If you received this  
in error, please contact the sender and delete the material from any  
system and destroy any copies.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip