[cisco-voip] How to set default PRI destination to Operator using MGCP

[Michael Thompson]

Axel,
    Lemon is right, that's how we generally set up the inbound call
default routing.  If you want, you can also get more restrictive
(creative use of Partitions and CSS) and allow the gateways to route
to those 'default routes' but not allow end users to dial those
defaults.  that way the operator isn't inundated with incorrectly
dialed internal calls.

MT

On Oct 31, 2007 11:50 AM, Axel Wilzinski <axe7961 at hotmail.com> wrote:
> How can I set all unassigned DN's that come in on a PRI to a default 4 digit
> extension?  I'm going crazy trying to figure this out.  Basically, I want
> all unassigned numbers in our DID range to automatically go to our operator.
>
> We are using CCM 4.2.3 with MGCP gateways.
>
> Thanks in advance.
> Axel
>
> ________________________________
> Climb to the top of the charts!  Play Star Shuffle:  the word scramble
> challenge with star power. Play Now!
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>