[cisco-voip] SMDI CM 5.1 - USB only?

[Ted Nugent]

NEC Neaxmail AD64 and the only option is apparently analog (at least
according to the NEC vendor), I went back to them about SIP last week
and I've not heard anything back.. They've contracted NEC to handle
the VM peice so I've really got no control and of course the system
has a "dual switch" integration with thier Centrex and soon to be CM.
>From a hardware perspective I don't have much flexibilty with this
since the customer has allready purchased the vg224 for the analog VM
port and I'm stuck making it work. I'm a bit concerned about how this
is all going to work since the NEC vendor is simply going to split the
SMDI (serial splitter) between Centrex and CM so if that will even
work I'm stuck using all the settings currently configured for Centrex
and praying I can tweak CMI enough to make it work. Any feedback is
welcome.


On Nov 7, 2007 11:50 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> What is the VM system are you using?  any other options? Qsig / SIP /
> PIMG / Etc.?
>
>
> On Nov 7, 2007 8:09 AM, Ted Nugent <tednugent73 at gmail.com> wrote:
> > Has anyone had any luck setting up SMDI directly to CM in 5.x, I'm
> > running a vg224 and SMDI directly to CM is my only option? According
> > to the service parameters it only supports serial through USB0 or USB1
> > rather then the onboard com port. Is there a cisco approved USB to
> > serial adapter for this? If USB is my only option I'm concerned with
> > chasing my tail on a "SMDI issue" and having it turn out to be a
> > driver problem? Are there any docs out there that outline CMI
> > configuration on CM5.x? I've check the normal places (SRND,System,
> > admin guide) and this doesn't appear to be covered in any detail.
> > Thanks
> > Ted
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>