[cisco-voip] SMDI CM 5.1 - USB only?

[Scott Voll]

What is the VM system are you using?  any other options? Qsig / SIP /
PIMG / Etc.?

On Nov 7, 2007 8:09 AM, Ted Nugent <tednugent73 at gmail.com> wrote:
> Has anyone had any luck setting up SMDI directly to CM in 5.x, I'm
> running a vg224 and SMDI directly to CM is my only option? According
> to the service parameters it only supports serial through USB0 or USB1
> rather then the onboard com port. Is there a cisco approved USB to
> serial adapter for this? If USB is my only option I'm concerned with
> chasing my tail on a "SMDI issue" and having it turn out to be a
> driver problem? Are there any docs out there that outline CMI
> configuration on CM5.x? I've check the normal places (SRND,System,
> admin guide) and this doesn't appear to be covered in any detail.
> Thanks
> Ted
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>