[cisco-voip] MGCP and Fractional PRI (busy b_channel) ?

[Jason Aarons (US)]

Cisco doesn't support fractional PRI with MGCP, so I recall a workaround
is busy out the B-channels, right? The end-user will never get H323
dial-peers as they have no IOS experience, so I need it to be MGCP.

 

In this case I have a  fax devices with only channels 0-7 .

 

Config t

Int serial 0/0/0:23

 isdn busy b_channel 9

isdn busy b_channel 10

isdn busy b_channel 11

isdn busy b_channel 12

isdn busy b_channel 13

isdn busy b_channel 14

isdn busy b_channel 15

isdn busy b_channel 16

isdn busy b_channel 17

isdn busy b_channel 18

isdn busy b_channel 19

isdn busy b_channel 20

isdn busy b_channel 21

isdn busy b_channel 22

 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071107/cc0fab60/attachment.html