[cisco-voip] MGCP and Fractional PRI (busy b_channel) ?

[Hesham Moussa]

Not sure if you came across TAC Case Collection article K14305072?

 

Cheers,

 

H

 

Hesham Moussa

IPT Specialist

Team IPT - UK

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: 07 November 2007 20:05
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MGCP and Fractional PRI (busy b_channel) ?

 

Cisco doesn't support fractional PRI with MGCP, so I recall a workaround
is busy out the B-channels, right? The end-user will never get H323
dial-peers as they have no IOS experience, so I need it to be MGCP.

 

In this case I have a  fax devices with only channels 0-7 .

 

Config t

Int serial 0/0/0:23

 isdn busy b_channel 9

isdn busy b_channel 10

isdn busy b_channel 11

isdn busy b_channel 12

isdn busy b_channel 13

isdn busy b_channel 14

isdn busy b_channel 15

isdn busy b_channel 16

isdn busy b_channel 17

isdn busy b_channel 18

isdn busy b_channel 19

isdn busy b_channel 20

isdn busy b_channel 21

isdn busy b_channel 22

 

 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 



**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: 
Units 1 &2, Great West Plaza, Riverbank Way,Brentford, TW8 9RE, UK

Please consider the environment before printing this e-mail
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071107/7577fa38/attachment-0001.html