[cisco-voip] strange problem in integration of Avaya G3 PBX with cisco router

[Justin Steinberg]

add the 'cablelength short' command underneath the controller for the
pbx integration.

On Nov 14, 2007 9:09 AM, zohaib shabir <zohaibshabir at gmail.com> wrote:
> Dear All,
>
> I am having strange problem in connecting the Avaya PBX G3 Si V8 with Cisco
> router, what is happening is that the E1 link b/w these two is going up and
> down. what i see the output from the sh controller command is that the
> increase in Path code Violations and Line Code violations. I have changed my
> physical cabling and also the cable from the tag block to the PBX, but the
> situation is unchanged. i am able to call either way from PBX to FXS phone
> or from FXS phone to PBX but the call gets disconnected within 10 seconds
> due to increase in Path Code Violations and Line Code Violations.
>
> I am also attaching the running config , sh ver and sh diag output for any
> possible help.
>
> -
> Regards,
> Zohaib Shabir
> Network Engineer(Voice)
> DWP Group, TECH Division Karachi
> Ph:+92-302-8232689
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>