[cisco-voip] strange problem in integration of Avaya G3 PBX with cisco router

[zohaib shabir]

i had already tried this command in controller mode, but it is not for E1 it
is only for T1 interfaces.

On 11/14/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
>
> add the 'cablelength short' command underneath the controller for the
> pbx integration.
>
> On Nov 14, 2007 9:09 AM, zohaib shabir <zohaibshabir at gmail.com> wrote:
> > Dear All,
> >
> > I am having strange problem in connecting the Avaya PBX G3 Si V8 with
> Cisco
> > router, what is happening is that the E1 link b/w these two is going up
> and
> > down. what i see the output from the sh controller command is that the
> > increase in Path code Violations and Line Code violations. I have
> changed my
> > physical cabling and also the cable from the tag block to the PBX, but
> the
> > situation is unchanged. i am able to call either way from PBX to FXS
> phone
> > or from FXS phone to PBX but the call gets disconnected within 10
> seconds
> > due to increase in Path Code Violations and Line Code Violations.
> >
> > I am also attaching the running config , sh ver and sh diag output for
> any
> > possible help.
> >
> > -
> > Regards,
> > Zohaib Shabir
> > Network Engineer(Voice)
> > DWP Group, TECH Division Karachi
> > Ph:+92-302-8232689
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>



-- 
Regards,
Zohaib Shabir
Network Engineer(Voice)
DWP Group, TECH Division Karachi
Ph:+92-302-8232689
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/26ed5dd6/attachment.html