[cisco-voip] FXO disconnect problem

[Jordi Riba (Europe)]

Can you share with us your FXO voice port configuration?

Jordi!



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
Sent: miércoles, 14 de noviembre de 2007 14:56
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO disconnect problem


hi to all

configure CCM 4.1 with FXO port. one of the extension is acting as PLAR for incoming calls. now what  happens if I'm unable to pick an incoming call and the caller gets disconneted before i go off-hook, the phone continues to ring and i have make it off-hook and on-hook again to stop ringing.

Already tried cpTone, timeout supervisory diconnet.


Syed Khalid Ali
_________________________________________________________________
Explore the seven wonders of the world
http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip