[cisco-voip] obtaining IP adress`s - voice / data

[wayne jackson]

 I don`t seem to obtain a straight answer from any data guys- I`m voice How do I make vlans go to different scoops and different DHCP servers- data, voice question 1 I have a switch which is connected to phones, on the port 1, I have configured a native data vlan and voice vlan- native 2, voice vlan 3-, port 2 have data native vlan 2 , voice vlan 3 . port 3 naive, voice vlan 4 Connected to this switch is the CCM using DHCP - test set up.On the DHCP I have set up 3 scoop VLAN 2 10.2.1.1 and VLAN 3 10.3.1.1. vlan 4 10.4.1.1 The first question is how can I make the vlan 2 go to scoop configured with 10.2.1.1 and vlan 3 to go to scoop with IP address 10.3.1.1 and VLAN 4 go to scoop vlan 4 10.4.1.1. The next question if the DHCP for data is else where , the switch has a IP helper address pointing to it so to turn the request into a routing request ? however as the site is running SRST I want to configure the SRST router with DHCP which will be used for the voice phones only all other devices will use the remote DHCP- how do I make the data device go to the remote DHCP and voice to use the SRST and choose the correct scoop is it something like interface vlan 2 ip helper xxxxx interface vlan 2 10.2.1.1. interface vlan 3 10.3.1.1 interface vlan 4 10.4.1.1 many thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/f0cf37e8/attachment.html