[cisco-voip] Renumbering Unity VoiceMail Port DNs

[Ted Nugent]

Run VM Wiz in CM, remove all but one port, renumber remain port and
rerun to re-add additional ports, add 75% of ports to Line Group
(75/25 rule for inbound/outbound ports).
Run unity integration and see if the DN had been assigned to the port
for loop detection and change the DNs assigned to the ports if
necessary.
confirm that 75% of ports are configured to answer calls and 25% set
for MWI/notifications.
The 75/25 is just a Cisco recommendation.



On Nov 14, 2007 6:25 PM, Matthew Melbourne <matt at melbourne.org.uk> wrote:
> What is the process for renumbering Unity VoiceMail ports. Currently our
> system uses DDIs for VM ports and MWI on/off. Ideally, it would be useful
> if we could reclaim and reuse these DDIs and migrate VM ports and MWI
> indicator DNs to non-DDIs in order to conserve numbers, and leave the VM
> Pilot as the only DDI.
>
> Should it just be a matter of running the VoiceMail Wizard in CallManager
> to recreate the VM ports, and then ensuring this configuration is
> reflected in the Unity Integration Manager?
>
> Cheers,
>
> Matt
>
> --
> Matthew Melbourne
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>