[cisco-voip] Mobility Voice Access not working

[Jason Wydra]

CUCMBE 6.0(1)
2811 12.4(13r)T

I can't seem to get mobile voice access working. I followed the directions
to a T but I still can't get the IVR portion to answer. I configured the
H323 gateway as shown below. I also added the dial-peers as shown in the
config guide. I still get a fast busy when I call the external access DID
from a cell phone. Q931 shows the call coming into the gateway but it gives
me an unallocated/unassigned number error. Is there a trick to get this vxml
application to trigger? Do I have to load something into flash in order for
it to work? All configs on the CallManager side are complete. Thanks!
**
*Step 3*

*Load* the VXML application from the Cisco Unified Communications Manager
server (Publisher).

Sample configuration for IOS Version 12.3 (13) and later:
*

•*application service CCM
*

•*http://<Unified CM cluster Publisher IP
Addr>:8080/ccmivr/pages/IVRMainpage.vxml
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/aeaac162/attachment-0001.html