[cisco-voip] Mobility voice access set-up trouble

[Ted Nugent]

Mobil Voice acces requires VXML and H323 but look at 2 Stage Dialing
offered in CM6, this give you prett much the same functionality minus
the pretty voice and can be run without switching to H323 and VXML.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a008085f7b1.html#wp1056325


On Nov 14, 2007 8:33 PM, Jason Wydra <jasonwydra at gmail.com> wrote:
> Nevermind. I just realized that it's done on the H323 gateway via a VXML
> application. Sorry for the post.
>
>
>
> On 11/14/07, Jason Wydra <jasonwydra at gmail.com> wrote:
> >
> > CUCMBE 6.0(1)
> >
> > I'm trying to set up the integrated mobility features of CUCMBE 6.0(1). I
> have a DID assigned for the incoming voice access calls. These incoming
> calls are supposed to trigger some IVR that asks for login and password
> before a call can be placed through the system via an external cell phone.
> I'm having a hard time finding out how my DID is supposed to trigger the
> IVR. I can't seem to find anything about it in the documentation. So, when I
> call the DID now it just gives me a fast busy because CallManager doesn't
> know what to do with it. Any help would be appreciated.
> >
> > Thanks,
> > Jason
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>