[cisco-voip] Mobility voice access set-up trouble

[Jason Wydra]

Thanks. Is there documentation that shows the configuration steps anywhere
that you know of?

Jason


On 11/14/07, Ted Nugent <tednugent73 at gmail.com> wrote:
>
> Mobil Voice acces requires VXML and H323 but look at 2 Stage Dialing
> offered in CM6, this give you prett much the same functionality minus
> the pretty voice and can be run without switching to H323 and VXML.
>
>
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a008085f7b1.html#wp1056325
>
>
> On Nov 14, 2007 8:33 PM, Jason Wydra <jasonwydra at gmail.com> wrote:
> > Nevermind. I just realized that it's done on the H323 gateway via a VXML
> > application. Sorry for the post.
> >
> >
> >
> > On 11/14/07, Jason Wydra <jasonwydra at gmail.com> wrote:
> > >
> > > CUCMBE 6.0(1)
> > >
> > > I'm trying to set up the integrated mobility features of CUCMBE 6.0(1).
> I
> > have a DID assigned for the incoming voice access calls. These incoming
> > calls are supposed to trigger some IVR that asks for login and password
> > before a call can be placed through the system via an external cell
> phone.
> > I'm having a hard time finding out how my DID is supposed to trigger the
> > IVR. I can't seem to find anything about it in the documentation. So,
> when I
> > call the DID now it just gives me a fast busy because CallManager
> doesn't
> > know what to do with it. Any help would be appreciated.
> > >
> > > Thanks,
> > > Jason
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/f3ebdd97/attachment.html