[cisco-voip] Mobility voice access set-up trouble

[Ted Nugent]

I've not gotten that far yet I've got to set it up in a couple weeks. Sorry




On Nov 14, 2007 10:42 PM, Jason Wydra <jasonwydra at gmail.com> wrote:
> Thanks. Is there documentation that shows the configuration steps anywhere
> that you know of?
>
> Jason
>
>
>
> On 11/14/07, Ted Nugent <tednugent73 at gmail.com> wrote:
> > Mobil Voice acces requires VXML and H323 but look at 2 Stage Dialing
> > offered in CM6, this give you prett much the same functionality minus
> > the pretty voice and can be run without switching to H323 and VXML.
> >
> >
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a008085f7b1.html#wp1056325
> >
> >
> > On Nov 14, 2007 8:33 PM, Jason Wydra <jasonwydra at gmail.com> wrote:
> > > Nevermind. I just realized that it's done on the H323 gateway via a VXML
> > > application. Sorry for the post.
> > >
> > >
> > >
> > > On 11/14/07, Jason Wydra <jasonwydra at gmail.com> wrote:
> > > >
> > > > CUCMBE 6.0(1)
> > > >
> > > > I'm trying to set up the integrated mobility features of CUCMBE
> 6.0(1). I
> > > have a DID assigned for the incoming voice access calls. These incoming
> > > calls are supposed to trigger some IVR that asks for login and password
> > > before a call can be placed through the system via an external cell
> phone.
> > > I'm having a hard time finding out how my DID is supposed to trigger the
> > > IVR. I can't seem to find anything about it in the documentation. So,
> when I
> > > call the DID now it just gives me a fast busy because CallManager
> doesn't
> > > know what to do with it. Any help would be appreciated.
> > > >
> > > > Thanks,
> > > > Jason
> > >
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>
>