[cisco-voip] Setting up 7961 in CME

[Paul Choi]

just put

term41.default
term61.default

for the 41 and 61 load statements.. do NOT put the
.loads on the end or the firmware files will not load.

Paul
--- "Christopher M. Bomba" <cbomba at s4nets.com> wrote:

> I am running CME 4.0 and I want to add the load
> information for 7961.  What
> do I put in for that information?
> 
>  
> 
> Config: 
> 
>  
> 
> Original Version of Firmware
> tftp-server flash:term41.default.loads 
> tftp-server flash:term61.default.loads 
> tftp-server flash:CVM41.2-0-2-26.sbn 
> tftp-server flash:Jar41.2-9-2-26.sbn 
> tftp-server flash:TERM41.7-0-3-0S.loads 
> 
>  
> 
> New Version of Firmware
> tftp-server flash:cnu41.2-7-6-26.sbn 
> tftp-server flash:apps41.1-1-3-30.sbn 
> tftp-server flash:cnu41.3-1-3-30.sbn 
> tftp-server flash:cvm41sccp.8-0-3-32.sbn 
> tftp-server flash:dsp41.1-1-3-30.sbn 
> tftp-server flash:jar41sccp.8-0-3-32.sbn 
> tftp-server flash:SCCP41.8-0-4SR2S.loads
> 
>  
> 
> Telephony-Service
> 
> telephony-service 
>  load 7960-7940 P0030702T023 
>  load 7914 S00104000100 
>  load 7936 cmterm_7936.3-3-5-0 
> 
>  load 7961 ?????????
> 
>  load 7941 ?????????
>  max-ephones 25 
>  max-dn 75 
>  ip source-address XXX.XXX.XXX.XXX port 2000 
>  cnf-file perphone 
>  time-zone 8 
>  voicemail 1000 
>  max-conferences 8 gain -6 
>  call-forward pattern .T 
>  moh music-on-hold.au 
>   dn-webedit 
>  time-webedit 
>  transfer-system full-consult 
>  transfer-pattern .T 
>  secondary-dialtone 9 
>  after-hours block pattern 1 1900 7-24 
>  after-hours block pattern 2 1976 7-24 
>  create cnf-files version-stamp Jan 01 2002 00:00:00
> 
>  
> 
> Thanks,
> 
>  
> 
> Chris
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs