[cisco-voip] Setting up 7961 in CME

[Christopher M. Bomba]

I am running CME 4.0 and I want to add the load information for 7961.  What
do I put in for that information?

 

Config: 

 

Original Version of Firmware
tftp-server flash:term41.default.loads 
tftp-server flash:term61.default.loads 
tftp-server flash:CVM41.2-0-2-26.sbn 
tftp-server flash:Jar41.2-9-2-26.sbn 
tftp-server flash:TERM41.7-0-3-0S.loads 

 

New Version of Firmware
tftp-server flash:cnu41.2-7-6-26.sbn 
tftp-server flash:apps41.1-1-3-30.sbn 
tftp-server flash:cnu41.3-1-3-30.sbn 
tftp-server flash:cvm41sccp.8-0-3-32.sbn 
tftp-server flash:dsp41.1-1-3-30.sbn 
tftp-server flash:jar41sccp.8-0-3-32.sbn 
tftp-server flash:SCCP41.8-0-4SR2S.loads

 

Telephony-Service

telephony-service 
 load 7960-7940 P0030702T023 
 load 7914 S00104000100 
 load 7936 cmterm_7936.3-3-5-0 

 load 7961 ?????????

 load 7941 ?????????
 max-ephones 25 
 max-dn 75 
 ip source-address XXX.XXX.XXX.XXX port 2000 
 cnf-file perphone 
 time-zone 8 
 voicemail 1000 
 max-conferences 8 gain -6 
 call-forward pattern .T 
 moh music-on-hold.au 
  dn-webedit 
 time-webedit 
 transfer-system full-consult 
 transfer-pattern .T 
 secondary-dialtone 9 
 after-hours block pattern 1 1900 7-24 
 after-hours block pattern 2 1976 7-24 
 create cnf-files version-stamp Jan 01 2002 00:00:00

 

Thanks,

 

Chris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071115/6f3a2e44/attachment-0001.html