[cisco-voip] Assign an FXO Port to only one user

[Jack Martin]

I have had success with this.  You have to apply inbound/outbound
corlists on the dial-peers and ephone-dns, assuming your gateway is
h323?

 

 

Example:

 

dial-peer cor list FXO

 member FXO

 

dial-peer voice 12345 pots

 corlist incoming FXO

 destination-pattern XXXX

 incoming called-number 414XXXXXXX

 port 0/3/3

 

dial-peer voice 23456 pots

 corlist outgoing FXO

 destination-pattern 8[2-9]......

 port 0/3/3

 

ephone-dn  32  dual-line

 number XXXX

 call-forward busy 5000

 call-forward noan 5000 timeout 16

 corlist incoming FXO

 

 

 

Jack Martin, CCVP

Network Engineer

Tushaus Computer Systems

10400 Innovation Drive, Suite 100

Wauwatosa, WI 53226

Desk: 414.908.2267

Cell: 414.477.6990

Fax: 414.908.4467

jackm at tushaus.com

www.Tushaus.com

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Moataz Mamdouh
Sent: Friday, November 16, 2007 7:06 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Assign an FXO Port to only one user

 

hi all
i need any other technique to assign an FXO port to particular user
whithout make the legacy configuration on the call manager ( Route
pattern , Partining , CCS ) for this USER ONLY to make him able to pick
his line. i tried to match the pots dial -peer using answer anddress but
this will not work for sure because the dial peer matching is based on
the translation then destination pattern then  the incomming called
number then answer address in the end.so any suggestions for this
case..maybe comlex transalation are in need ?????
thx

  

________________________________

Never miss a thing. Make Yahoo your homepage.
<http://us.rd.yahoo.com/evt=51438/*http:/www.yahoo.com/r/hs>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071116/eba0d9e5/attachment.html