[cisco-voip] setting up voicemail on a hunt group

[Ryan Ratliff]

With 4.1 you will need to send your call to a dummy DN with CFA set  
to the hunt group.  Then add the VM line group as the last member of  
the hunt list.  When the call gets to VM it will reach the mailbox  
for the dummy DN.

With CM 4.2 and later there is a "forward hunt no answer" destination  
you can set on the hunt pilot itself and you can then set up the vm  
mailbox with the DN of the hunt pilot.

-Ryan

On Nov 21, 2007, at 9:28 AM, Michael Muscat wrote:

Hello,



I am running CM 4.1(3)sr2 and  was wondering if anyone knew the steps  
or had some docs on how to get a call to a hunt group to go to a  
voicemail box if nobody picks up the call in the hunt group.  We are  
using several different hunt groups and I just realized that all of  
them just go to a fast busy signal and disconnect the call once it  
gets to the end of the list.  We are using 4 digit extensions  
starting with 2: ex: 2653.   I have played around with the *2xxx  
method for creating VM, but can never get it to work.   I am getting  
ready to go live with an auto attendant script that is in IPCCX and  
don’t want to do this until the hunt lists go to voicemail boxes.   
Any help would be greatly appreciated.



Thanks,



Mike

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip