[cisco-voip] Migrating Extensions from 2 to 1

[Dustin S Fowler]

It might be less headache to delete the phones in groups and recreate. A lot
les hassle. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Wednesday, November 21, 2007 7:23 PM
To: Cisco VoIPoE List
Subject: [cisco-voip] Migrating Extensions from 2 to 1

I just upgraded a customer from CCM 3.3 to 6.0...

They have two appearances of a DN on each phone, in a line1 and a
line2 partition...

This was normal because you could only have 1 call on each line
appearance back then.

So, I want to convert them to single line appearances, with max calls
4 and busy trigger of 2... (currently they are 1 and 1).

And I want to delete the second line...

The first part I can do with BAT... however, part two, deleting the
line seems like it would be impossible to do with BAT, safely...



Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip