[cisco-voip] Migrating Extensions from 2 to 1

[Lelio Fulgenzi]

while it sounds like hitting a nail with a sledgehammer, consider exporting 
the phones, modifying the file, deleting, then reimporting.

i've done it, and it works rather well.

----- Original Message ----- 
From: "Jonathan Charles" <jonvoip at gmail.com>
To: "Cisco VoIPoE List" <cisco-voip at puck.nether.net>
Sent: Wednesday, November 21, 2007 7:23 PM
Subject: [cisco-voip] Migrating Extensions from 2 to 1


>I just upgraded a customer from CCM 3.3 to 6.0...
>
> They have two appearances of a DN on each phone, in a line1 and a
> line2 partition...
>
> This was normal because you could only have 1 call on each line
> appearance back then.
>
> So, I want to convert them to single line appearances, with max calls
> 4 and busy trigger of 2... (currently they are 1 and 1).
>
> And I want to delete the second line...
>
> The first part I can do with BAT... however, part two, deleting the
> line seems like it would be impossible to do with BAT, safely...
>
>
>
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>