[cisco-voip] Meet-Me Conference CallManager Express

[Kevin Dunn]

Michael

I don't see the config, can you post it or attach it again?

Kevin


On 11/23/07, ano-1 at worldonline.dk <ano-1 at worldonline.dk> wrote:
>
>
>
> Hi,
>
> I need help!!
>
> I´ve tryed to configure Meet-Me on a ccme, but it will not work!!
>
> Have anybody tryed to configure it?
>
> I´ve attatch my config and below is my "show ver"
>
>
>
> CCME-lab#show ver
> Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4
> (15)T1,
> RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2007 by Cisco Systems, Inc.
> Compiled Wed 18-Jul-07 06:22 by prod_rel_team
>
> ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>
> CCME-lab uptime is 17 hours, 58 minutes
> System returned to ROM by reload at 15:45:31 CUT Thu Nov 22 2007
> System restarted at 15:46:53 CUT Thu Nov 22 2007
> System image file is "flash:c2800nm-ipvoicek9-mz.124-15.T1.bin"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export at cisco.com.
>
> Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
> Processor board ID FCZ092372QP
> 11 FastEthernet interfaces
> 1 Channelized E1/PRI port
> DRAM configuration is 64 bits wide with parity enabled.
> 239K bytes of non-volatile configuration memory.
> 62720K bytes of ATA CompactFlash (Read/Write)
>
> Configuration register is 0x2102
>
>
> Can sombody please help me??
>
> Michael from Denmark
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071123/bf4b6e80/attachment.html