[cisco-voip] Meet-Me Conference CallManager Express

[Jack Martin]

I've been successful setting up MeetMe on a 2811 running CCME 4.1 running IOS 12.4(15)T1.  This example MeetMe is set for a single, 24 party conference:

---------------------------------------------

voice class custom-cptone jointone
 dualtone conference
  frequency 1200 1200
  cadence 150 50 150 50
!
!
voice class custom-cptone leavetone
 dualtone conference
  frequency 900 900
  cadence 150 50 150 50



voice-card 0
 dspfarm
 dsp services dspfarm
!
!
sccp local FastEthernet0/0.8
sccp ccm 172.16.128.8 identifier 1 priority 1 version 4.1 
sccp
!
!
sccp ccm group 1
 bind interface FastEthernet0/0.8
 associate ccm 1 priority 1
 associate profile 1 register mtp123412341234
 keepalive retries 5
!
!
dspfarm profile 1 conference
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 codec g729br8
 maximum sessions 1
 conference-join custom-cptone jointone
 conference-leave custom-cptone leavetone
 associate application SCCP
!
!
telephony-service
 sdspfarm conference mute-on 11 mute-off 12
 sdspfarm units 3
 sdspfarm tag 2 mtp123412341234
 conference hardware
!
!
ephone-dn  60  dual-line
 number 1234
 conference meetme
 no huntstop
!
!
ephone-dn  61  dual-line
 number 1234
 conference meetme
 preference 1
 no huntstop
!
!
ephone-dn  62  dual-line
 number 1234
 conference meetme
 preference 2

------------------------------------------

Jack Martin, CCVP
Network Engineer
Tushaus Computer Systems
10400 Innovation Drive, Suite 100
Wauwatosa, WI 53226
Desk: 414.908.2267
Cell: 414.477.6990
Fax: 414.908.4467
jackm at tushaus.com
www.Tushaus.com

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ano-1 at worldonline.dk
Sent: Friday, November 23, 2007 2:48 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Meet-Me Conference CallManager Express



Hi,

I need help!!

I´ve tryed to configure Meet-Me on a ccme, but it will not work!!

Have anybody tryed to configure it?

I´ve attatch my config and below is my "show ver"



CCME-lab#show ver
Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(15)T1, 
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 18-Jul-07 06:22 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

CCME-lab uptime is 17 hours, 58 minutes
System returned to ROM by reload at 15:45:31 CUT Thu Nov 22 2007
System restarted at 15:46:53 CUT Thu Nov 22 2007
System image file is "flash:c2800nm-ipvoicek9-mz.124-15.T1.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export at cisco.com.

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FCZ092372QP
11 FastEthernet interfaces
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


Can sombody please help me??

Michael from Denmark
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip