[cisco-voip] Upgrading IPVC/MCU to 5.1.0.24 caused failure to register

[Jefflin Choi]

successfully recovered it using UploadUtility 1.3.6.

I've successfully upgrade the MCU to 5.1.0.24 and EMP to 5.1.0.27 and all is
working fine.

Thanks.



On 11/26/07, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> Now it is time for TAC...
>
>
>
> Jonathan
>
> On Nov 26, 2007 2:33 AM, Jefflin Choi <jefflin.choi at gmail.com> wrote:
> > Bad becomes worst.
> > Tried downgrading MCU version and now it won't boot properly. Seems like
> the
> > upload was corrupt.
> > Can't access the GUI menu of the MCU. Since mcucfg can't be loaded, i do
> not
> > know the default snmp read and write string, upgrade doesn't push
> through
> > with the snmp string.
> >
> > Any ideas?
> >
> > On the console, getting:
> >
> ==============================================================================
> >  The last MCU config burn operation wrong: WARNING
> > Retrieved old volume params with %75 confidence:
> > Volume Parameters: FAT type: FAT16, sectors per cluster 255
> >   255 FAT copies, 0 clusters, 65535 sectors per FAT
> >   Sectors reserved -1, hidden -1, FAT sectors 16711425
> >   Root dir entries -1, sysId (null)  , serial number ffffffff
> >   Label:"           " ...
> >  Disk with 512 sectors of 512 bytes will be formatted with:
> > Volume Parameters: FAT type: FAT12, sectors per cluster 1
> >   2 FAT copies, 500 clusters, 2 sectors per FAT
> >   Sectors reserved 1, hidden 0, FAT sectors 4
> >    Root dir entries 112, sysId VXDOS12 , serial number ffffffff
> >   Label:"           " ...
> >
> >
> >
> >
> >
> >
> > On Nov 26, 2007 1:21 PM, Jefflin Choi <jefflin.choi at gmail.com> wrote:
> >
> > >
> > > Hi All,
> > >
> > > I've upgraded the MCU 3545 to version 5.1.0.24 and was successful.
> However
> > the sccp registration of the mcu on the ccm 5.1.2 failed, Unregistered.
> From
> > the logs of the MCU, it says not compatible with MP v2.
> > >
> > > I am also trying to upgrade the emp version 5.1.0.27 where according
> to
> > the cco it is compatible with mcu 5.1.0.24 however upgrade fails with
> reason
> > ..."the SW target type different from HW target type"
> > >
> > > Could someone point me to the correct direction?
> > > What software does the mcu need to run the 5.1.0.24 and register via
> sccp
> > on ccm 5.1?
> > >
> > > Thanks!
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071127/bb27deef/attachment.html