[cisco-voip] Retrieve installed license for shipped CUC 6.x

[Craig Staffin]

Antonis,

You are correct as soon as you add in any license file it will deactivate
the "lab" license.  So in your case you are correct you will have only 100
DLU's.

As far as getting the license file.  You can't the system will not let you
download it.  However on any FRESH install of CUCM 6 it will be loaded.
However this is only on a fresh install and not on an upgrade using the DMA
tool.

Craig

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
Sent: Wednesday, November 28, 2007 6:49 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] Retrieve installed license for shipped CUC 6.x

Hi,
i have just received a new CUC 6.X. I continued the installation and 
when it finished i discovered:
1 node license and 50 units licenses that cisco have promised about 6.X 
versions.
How can i have the lic file so, i can use it in case of future 
reinstallation?

P.S. I have also ordered 100 units licenses. After i activate them and 
get the lic file, when i install i will
have 100 units i guess and not 150. Isn't it so? :-)

Thnaks
Antonis


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip