[cisco-voip] Retrieve installed license for shipped CUC 6.x

[Anthony Kouloglou]

Hi Craig,
so i need to apply also the node license that i have purchased and not 
only the units license.
The lab license gets deactivated immediately after i upload the proper 
unit or node license?

Antonis

Craig Staffin wrote:
> Antonis,
>
> You are correct as soon as you add in any license file it will deactivate
> the "lab" license.  So in your case you are correct you will have only 100
> DLU's.
>
> As far as getting the license file.  You can't the system will not let you
> download it.  However on any FRESH install of CUCM 6 it will be loaded.
> However this is only on a fresh install and not on an upgrade using the DMA
> tool.
>
> Craig
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
> Sent: Wednesday, November 28, 2007 6:49 AM
> To: cisco-voip at puck-nether.net
> Subject: [cisco-voip] Retrieve installed license for shipped CUC 6.x
>
> Hi,
> i have just received a new CUC 6.X. I continued the installation and 
> when it finished i discovered:
> 1 node license and 50 units licenses that cisco have promised about 6.X 
> versions.
> How can i have the lic file so, i can use it in case of future 
> reinstallation?
>
> P.S. I have also ordered 100 units licenses. After i activate them and 
> get the lic file, when i install i will
> have 100 units i guess and not 150. Isn't it so? :-)
>
> Thnaks
> Antonis
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>