[cisco-voip] Retrieve installed license for shipped CUC 6.x

Ryan Ratliff rratliff at cisco.com
Wed Nov 28 11:17:49 EST 2007


Correct for CUCM 6.x there are 3 different types of licenses.  The  
first two were also in 5.x, being the DLU and node licenses.  The  
third, and new one, is the platform license.   Typically the DLU and  
node licenses come in the same .lic file (or multiple ones depending  
on the number of DLUs you need).

A new CUCM 6 install will have 50 DLUs, 1 node, and a platform  
license, as you noted.  As soon as you upload ANY license file these  
"lab" licenses are deactivated.   Make sure you have your DLUs, node,  
and platform licenses so you can upload them all to the server.   
Without the platform license the CallManager service will not start.


-Ryan

On Nov 28, 2007, at 8:01 AM, Anthony Kouloglou wrote:

Hi Craig,
so i need to apply also the node license that i have purchased and not
only the units license.
The lab license gets deactivated immediately after i upload the proper
unit or node license?

Antonis

Craig Staffin wrote:
> Antonis,
>
> You are correct as soon as you add in any license file it will  
> deactivate
> the "lab" license.  So in your case you are correct you will have  
> only 100
> DLU's.
>
> As far as getting the license file.  You can't the system will not  
> let you
> download it.  However on any FRESH install of CUCM 6 it will be  
> loaded.
> However this is only on a fresh install and not on an upgrade using  
> the DMA
> tool.
>
> Craig
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony  
> Kouloglou
> Sent: Wednesday, November 28, 2007 6:49 AM
> To: cisco-voip at puck-nether.net
> Subject: [cisco-voip] Retrieve installed license for shipped CUC 6.x
>
> Hi,
> i have just received a new CUC 6.X. I continued the installation and
> when it finished i discovered:
> 1 node license and 50 units licenses that cisco have promised about  
> 6.X
> versions.
> How can i have the lic file so, i can use it in case of future
> reinstallation?
>
> P.S. I have also ordered 100 units licenses. After i activate them and
> get the lic file, when i install i will
> have 100 units i guess and not 150. Isn't it so? :-)
>
> Thnaks
> Antonis
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list