[cisco-voip] RTMT on CCM5.1

[Jason Aarons (US)]

If I choose no to DNS during installation, how do I go back and re-enable DNS after the face?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Tuesday, October 02, 2007 2:17 PM
To: Sebastián Graña
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RTMT on CCM5.1

Hello Sebastian,

You are encountering the defect CSCsf08244. Please follow the 
instructions in the workaround.

If you want a permanent fix without enabling DNS open a TAC case and 
request the ES where that defect is resolved.

/Wes

Sebastián Graña wrote:
> Wes
>
> DNS is not configured, I'm using SMTP's IP address.
>
> I've done the capture and there is nothing on the wire coming from any of the call managers with dst port TCP/25.
> About the logs, wich service log should I look for? 
>
> Thanks
>
> Sebas
>
> -----Mensaje original-----
> De: Wes Sisk [mailto:wsisk at cisco.com] 
> Enviado el: Lunes, 01 de Octubre de 2007 07:34 p.m.
> Para: Sebastián Graña
> Asunto: Re: [cisco-voip] RTMT on CCM5.1
>
> it still applies.  I just update a release-note on the 2nd cdets. the 1st tells you most of what you need.  do you have dns configured?  have you checked the platform logs or performed a packet capture to see the smtp exchange?
>
> Sebastián Graña wrote:
>   
>> Hi Wes
>> Thanks for yuor reply.
>>  
>> I'm using CCM 5.1.1.3000-5 so I believe first Bug does not apply, or 
>> it does?
>> Not able to view information for CSCsh33877, can you tell me what is 
>> it about?
>>  
>> Thanks
>>
>> ----------------------------------------------------------------------
>> --
>> *De:* Wes Sisk [mailto:wsisk at cisco.com] *Enviado el:* Lunes, 01 de 
>> Octubre de 2007 06:19 p.m.
>> *Para:* Sebastián Graña
>> *CC:* cisco-voip at puck.nether.net
>> *Asunto:* Re: [cisco-voip] RTMT on CCM5.1
>>
>> Watch out for CSCsf08244 and CSCsh33877.
>>
>> /Wes
>>
>> Sebastián Graña wrote:
>>     
>>> Hi,
>>>  
>>>     I'm trying to configure alert email sending with this tool but it 
>>> is not working.
>>>     This is what I've done so far:
>>>  
>>>     In RTMT, Tools-Alert-Config Mail Server. There I put the IP 
>>> address of the SMTP server I want to use, and the port.
>>>     In Tools-Alert-Config Alert Action, in Default added email 
>>> recipients.
>>>  
>>>     I have no activity in the SMTP server form any of the call managers.
>>>  
>>>     Has anyone seen this problem?
>>>  
>>> Thank you
>>>  
>>> Best Regards
>>>  
>>> Sebastián Graña
>>> MCSE - CCNA
>>> Departamento Técnico
>>> *Urudata Infraestructura*
>>> Canelones 1611
>>> Montevideo / Uruguay
>>> Tel.: (+598 2) 419 6457
>>>  
>>> ---------------------------------------------------------------------
>>> ---
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>       
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.