[cisco-voip] dial-peer circulation iusse
David Lin
david.lin at msn.com
Thu Oct 11 21:47:40 EDT 2007
Hi all,
In order to conver the SIP call to H323 and G.711 to G.729/723, it means SIP call-->Port 3/1-->port 3/2-->another H323 gateway. I set cross-connection on two T1 interfaces on one Cisco gateway and the dial-peer are as following,
dial-peer voice 100 voip incoming called-number 999T session protocol sipv2!dial-peer voice 200 pots destination-pattern 200T port 3/1:D prefix 999!dial-peer voice 300 pots incoming called-number 999T direct-inward-dial!dial-peer voice 400 voip destination-pattern 999T session target ipv4:10.10.30.40
Somehow the gateway keeps trying the dial-peer before sending out the H323 Call to the far end gateway, but some time not. It looks like the call will exhaust the channel resource. What's wrong in the configuration? Can anyone advise? Thank you.
CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers0xA09 1D4F 0x64A5B6D0 3/1:D.0 3006/3 *5195226699 g711alaw 100/2000xA0A 1D50 0x64B7ADF0 3/2:D.0 No dsp 5195226699 None 300/2000xA0B 1D50 0x64A5B6D0 3/1:D.1 No dsp *5195226699 None 200/3000xA0C 1D53 0x64B7ADF0 3/2:D.1 No dsp 5195226699 None 300/2000xA0D 1D53 0x64A5B6D0 3/1:D.2 No dsp *5195226699 None 200/3000xA0E 1D56 0x64B7ADF0 3/2:D.2 No dsp 5195226699 None 300/2000xA0F 1D56 0x64A5B6D0 3/1:D.3 No dsp *5195226699 None 200/3000xA10 1D59 0x64B7ADF0 3/2:D.3 3008/2 5195226699 g729r8 300/400
0xA2B 1D7A 0x64A5B6D0 3/1:D.4 3009/5 *4163955400 g711ulaw 100/2000xA2C 1D7B 0x64B7ADF0 3/2:D.4 3008/4 4163955400 g729r8 300/4007 active calls found
_________________________________________________________________
Are you ready for Windows Live Messenger Beta 8.5 ? Get the latest for free today!
http://entertainment.sympatico.msn.ca/WindowsLiveMessenger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071011/24d6a492/attachment.html
More information about the cisco-voip
mailing list