[cisco-voip] CM 6.0 unable to Cfwdall

James Grace jgrace at adcapnet.com
Tue Oct 16 09:41:06 EDT 2007


?
for some reason im not able to hit the  Cfwdall button in CM 6.0.  I can dial any pattern i want to, but when i press cfwdall its not allowing any digits.  It give me "your call can not be completed.  Never ran into this on previous ver.  
 
James Grace 
 
Systems Engineer
Adcap Network Systems, Inc.
6865 Shiloh Road East, Suite 250
Alpharetta, GA 30005
 
office: 678-456-6986
direct: 678-456-6761
jgrace at adcapnet.com
www.adcapnet.com <http://www.adcapnet.com/> 
Disclaimer For ADCAP Network Systems

"The information transmitted is intended only for the person or entity to which it is addressed and may
contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of,
or taking of any action in reliance upon this information by persons or entities other than the intended
recipient is prohibited. If you received this message in error, please contact the sender and delete the
material from all computers."

This original email was sent to the internet for delivery at 16 Oct 2007 09:39:53 -0400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071016/945acc41/attachment.html 


More information about the cisco-voip mailing list