[cisco-voip] Triple Unity servers...

[Jonathan Charles]

The weird question is, why would you want/need TTS in Unity
Connections... if it is voicemail only?


Jonathan

On 10/15/07, Pat Hayes <pat-cv at wcyv.com> wrote:
> They're correct, there is no such thing in the Unity world at the
> moment. I believe you (or whoever ordered this) is thinking of the Voice
> Recognition server, new to 5.0. In order to get voice recognition
> features, you have to use another server. Installation procedure here:
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/umexfo/5xcuigumefoappc.html
>
> -------- Original Message  --------
> From: "Jonathan Charles" <jonvoip at gmail.com>
> To: "Aman Chugh" <aman.chugh at gmail.com>
> Cc: Cisco Voip Mailing list <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] Triple Unity servers...
> Date: 10/15/2007 3:32 PM
>
> > OK, I opened a TAC case and here is the response:
> >
> >
> > "Unfortunately, you cannot install TTS server on a dedicated hardware
> > box, even on CU ver 5.0. Only Cisco Unity Connection allows you to do
> > that."
> >
> >
> > Jonathan
> >
> > On 10/15/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> >> Well, those are the questions:
> >>
> >> A: How is this done, if it can be done at all.
> >>
> >> B: Would TAC support afterwards.
> >>
> >>
> >> Jonathan
> >>
> >> On 10/15/07, Aman Chugh <aman.chugh at gmail.com> wrote:
> >>> Not Sure if this would be a supported TAC deployement.
> >>>
> >>> I am thinking that you can run the unity setup and enable TTS setting only
> >>> on the third box but It would be interesting to learn if three unity servers
> >>> can exist toegther in the failover setup.
> >>>
> >>> Do let us know what happens next !
> >>>
> >>> Aman
> >>>
> >>>
> >>> On 10/15/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> >>>> So, I have to do this on Tuesday, and was wondering if anyone had any
> >>> ideas...
> >>>> The plan is to install the primary and secondary Unity servers without
> >>>> TTS and then run the Failoverconfig.exe to mate them together...
> >>>> Pretty simple (I hope).
> >>>>
> >>>> The question is about this third Unity server, the dedicated TTS
> >>>> box... how do I link that to the Unity twins?
> >>>>
> >>>> Not finding a lot of love on Cisco's website here... (no mention
> >>>> anywhere of the concept of a dedicated TTS box)...
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> Jonathan
> >>>>
> >>>> On 9/19/07, Jonathan Charles < jonvoip at gmail.com> wrote:
> >>>>> Cust ordered 3 Unity servers, a  primary, a secondary and a dedicated
> >>> TTS box.
> >>>>> Not sure how to install the TTS box. Do I set it up normally (SQL,
> >>>>> Exchange tools, etc.) and then install Unity but only select TTS (and
> >>>>> not select Unity)?
> >>>>>
> >>>>> Also, would I NOT select TTS on the two primaries?
> >>>>>
> >>>>> Just curious, I didn't sell this monster...
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> Jonathan
> >>>>>
> >>>> _______________________________________________
> >>>> cisco-voip mailing list
> >>>> cisco-voip at puck.nether.net
> >>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>
> >>>
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>