[cisco-voip] Triple Unity servers...

[Justin Steinberg]

Uconn supports TTS for exchange:

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/1x/installation/guide/ig_120.html


On 10/16/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> The weird question is, why would you want/need TTS in Unity
> Connections... if it is voicemail only?
>
>
> Jonathan
>
> On 10/15/07, Pat Hayes <pat-cv at wcyv.com> wrote:
> > They're correct, there is no such thing in the Unity world at the
> > moment. I believe you (or whoever ordered this) is thinking of the Voice
> > Recognition server, new to 5.0. In order to get voice recognition
> > features, you have to use another server. Installation procedure here:
> >
> > http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/umexfo/5xcuigumefoappc.html
> >
> > -------- Original Message  --------
> > From: "Jonathan Charles" <jonvoip at gmail.com>
> > To: "Aman Chugh" <aman.chugh at gmail.com>
> > Cc: Cisco Voip Mailing list <cisco-voip at puck.nether.net>
> > Subject: [cisco-voip] Triple Unity servers...
> > Date: 10/15/2007 3:32 PM
> >
> > > OK, I opened a TAC case and here is the response:
> > >
> > >
> > > "Unfortunately, you cannot install TTS server on a dedicated hardware
> > > box, even on CU ver 5.0. Only Cisco Unity Connection allows you to do
> > > that."
> > >
> > >
> > > Jonathan
> > >
> > > On 10/15/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > >> Well, those are the questions:
> > >>
> > >> A: How is this done, if it can be done at all.
> > >>
> > >> B: Would TAC support afterwards.
> > >>
> > >>
> > >> Jonathan
> > >>
> > >> On 10/15/07, Aman Chugh <aman.chugh at gmail.com> wrote:
> > >>> Not Sure if this would be a supported TAC deployement.
> > >>>
> > >>> I am thinking that you can run the unity setup and enable TTS setting only
> > >>> on the third box but It would be interesting to learn if three unity servers
> > >>> can exist toegther in the failover setup.
> > >>>
> > >>> Do let us know what happens next !
> > >>>
> > >>> Aman
> > >>>
> > >>>
> > >>> On 10/15/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > >>>> So, I have to do this on Tuesday, and was wondering if anyone had any
> > >>> ideas...
> > >>>> The plan is to install the primary and secondary Unity servers without
> > >>>> TTS and then run the Failoverconfig.exe to mate them together...
> > >>>> Pretty simple (I hope).
> > >>>>
> > >>>> The question is about this third Unity server, the dedicated TTS
> > >>>> box... how do I link that to the Unity twins?
> > >>>>
> > >>>> Not finding a lot of love on Cisco's website here... (no mention
> > >>>> anywhere of the concept of a dedicated TTS box)...
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>> Jonathan
> > >>>>
> > >>>> On 9/19/07, Jonathan Charles < jonvoip at gmail.com> wrote:
> > >>>>> Cust ordered 3 Unity servers, a  primary, a secondary and a dedicated
> > >>> TTS box.
> > >>>>> Not sure how to install the TTS box. Do I set it up normally (SQL,
> > >>>>> Exchange tools, etc.) and then install Unity but only select TTS (and
> > >>>>> not select Unity)?
> > >>>>>
> > >>>>> Also, would I NOT select TTS on the two primaries?
> > >>>>>
> > >>>>> Just curious, I didn't sell this monster...
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> Jonathan
> > >>>>>
> > >>>> _______________________________________________
> > >>>> cisco-voip mailing list
> > >>>> cisco-voip at puck.nether.net
> > >>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> > >>>>
> > >>>
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>