[cisco-voip] how to change Span to PC Port configuration in a 7941 phone

[Scott Voll]

on the ccmadmin phone device it should be at the bottom.  I'm running 4.1 so
maybe something changed in 4.2 but I wouldn't think so.

Scott


On 10/19/07, Pedro Nogueira <pedro.nogueira at sicnet.pt> wrote:
>
>  Hello folks,
>
>
> Does anybody knows how to change the Span to PC Port configuration in a
> 7941 phone - No we cant do it through the web conf page since the option
> does not appear on it.
>
> On the phone configuration i cant access it too, since the option appear
> but is disabled (not accessible), so i cant modify it.
>
> Does anybody knows why does this happen and how to modify this setting ?
>
> My Call Manager is a 4.2.3 version.
>
> it seems a really stupid question but i really appreciate any help on it,
> since i cant put the supervisor monitor option of CRS running without this
> option on.
>
> Really need help here,any thoughts or suggestions would be really
> appreciated !!!
>
>
> Thanks in advanced,
> regards,
>
> Peter
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071019/f36d3475/attachment.html