[cisco-voip] Castelle Fax Press turn off ECM and Super G3

[Jason Aarons (US)]

I had a customer on the phone with Castelle Fax Press technical support
(they don't seem very knowledgeable of their equipment I noticed) and
had an issue escalated to Castelle development who told me they don't
have an option to turn off ECM or set the speed to G3.

Anyone else setup one of their boxes via T1 PRI back to ISR router?  I
find it hard to believe they can't turn of ECM or disable Super G3...

Also Castelle is looking at adding T.38 support down the road, seemed to
me they are way behind the times.

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.