[cisco-voip] MGCP dial-peer order changing

[Lelio Fulgenzi]

If they are not at the top, then the MGCP analog ports will not work when 
the box is not in SRST mode. By top, I mean as long as they appear before 
the H323 dial-peers.

This was thrown out to the list a while back.

----- Original Message ----- 
From: "Patrick Diener" <patrick.diener at gmail.com>
To: <cisco-voip at puck.nether.net>
Sent: Monday, September 03, 2007 4:00 AM
Subject: Re: [cisco-voip] MGCP dial-peer order changing


> just out of curiosity, any technical reason why you want to have the
> MGCP dial-peers on top of the dial-peer listing?
>
> Cheers, Patrick
>
> On 8/31/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>
>>
>> OK, this is now the second time that I find my MGCP dial-peers at the 
>> bottom
>> of my dial-peer list after I modified things to put them at the top.
>>
>> What is going on?
>>
>> Have others seen this?
>>
>> Lelio
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>