[cisco-voip] MGCP dial-peer order changing

[Patrick Diener]

thanks, guess I missed that thread...

now I consider myself very lucky to use MGCP only for ISDN PRI backhauling ;-)

Regards
Patrick

On 9/4/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> If they are not at the top, then the MGCP analog ports will not work when
> the box is not in SRST mode. By top, I mean as long as they appear before
> the H323 dial-peers.
>
> This was thrown out to the list a while back.
>
> ----- Original Message -----
> From: "Patrick Diener" <patrick.diener at gmail.com>
> To: <cisco-voip at puck.nether.net>
> Sent: Monday, September 03, 2007 4:00 AM
> Subject: Re: [cisco-voip] MGCP dial-peer order changing
>
>
> > just out of curiosity, any technical reason why you want to have the
> > MGCP dial-peers on top of the dial-peer listing?
> >
> > Cheers, Patrick
> >
> > On 8/31/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> >>
> >>
> >> OK, this is now the second time that I find my MGCP dial-peers at the
> >> bottom
> >> of my dial-peer list after I modified things to put them at the top.
> >>
> >> What is going on?
> >>
> >> Have others seen this?
> >>
> >> Lelio
> >>
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>