[cisco-voip] CM Caller Name PRI support

Wes Sisk wsisk at cisco.com
Tue Sep 4 09:25:49 EDT 2007


feature is called cname and it is part of the ni3 specification i  
believe.  telco switch must be upgraded past version (x) to get it,  
then just request primary-ni as switch type.

/Wes

On Aug 30, 2007, at 11:11 PM, Carter, Bill wrote:

I have tried talking to a couple of Telco's regarding Caller Name  
support on PRI trunk.  Both vendors have been confused on the terms  
"Display ie" and "Facility ie".  Any suggestions on this for talking  
to Verizon or SBC/ATT ?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070904/5919b4b4/attachment.html 


More information about the cisco-voip mailing list