[cisco-voip] CM Caller Name PRI support

[Jason Aarons (US)]

The common offered delivery method by telcos is Facility IE, and
customers request H323 for Mobility Manager/CVP, etc.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Tuesday, September 04, 2007 9:26 AM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM Caller Name PRI support

 

feature is called cname and it is part of the ni3 specification i
believe.  telco switch must be upgraded past version (x) to get it, then
just request primary-ni as switch type.

 

/Wes

 

On Aug 30, 2007, at 11:11 PM, Carter, Bill wrote:

 

I have tried talking to a couple of Telco's regarding Caller Name
support on PRI trunk.  Both vendors have been confused on the terms
"Display ie" and "Facility ie".  Any suggestions on this for talking to
Verizon or SBC/ATT ?

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070904/8b477af6/attachment.html