[cisco-voip] anyone using VG224 with DC power?
Lelio Fulgenzi
lelio at uoguelph.ca
Tue Sep 4 15:13:22 EDT 2007
Saw that...problem is, there are no Cisco supported DC power cables...from what I can find, I have to make my own. I'm hoping others out there have something they can share.
Also, typically DC power sources are usually 48 volts (from what I'm told) and I'm wondering what people have done with the VG224 in this case.
----- Original Message -----
From: Mike Lay (milay)
To: Lelio Fulgenzi ; Cisco VoIPoE List
Sent: Tuesday, September 04, 2007 2:59 PM
Subject: RE: [cisco-voip] anyone using VG224 with DC power?
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/prod_installation_guide09186a00801d7e59.html#wp1095462
------------------------------------------------------------------------------
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, September 04, 2007 1:20 PM
To: Cisco VoIPoE List
Subject: [cisco-voip] anyone using VG224 with DC power?
anyone out there using VG224 with DC power? I'd like to discuss what cabling options etc, you used.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070904/90ba4a1a/attachment-0001.html
More information about the cisco-voip
mailing list