[cisco-voip] anyone using VG224 with DC power?

[Tim Jackson]

APC and some others make a custom UPS for this... You can use it for the
IAD2431s as well...

http://www.apc.com/resource/include/techspec_index.cfm?base_sku=CP24U12D

--
Tim

On 9/4/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>  Saw that...problem is, there are no Cisco supported DC power
> cables...from what I can find, I have to make my own. I'm hoping others out
> there have something they can share.
>
> Also, typically DC power sources are usually 48 volts (from what I'm told)
> and I'm wondering what people have done with the VG224 in this case.
>
>
> ----- Original Message -----
> *From:* Mike Lay (milay) <milay at cisco.com>
> *To:* Lelio Fulgenzi <lelio at uoguelph.ca> ; Cisco VoIPoE List<cisco-voip at puck.nether.net>
> *Sent:* Tuesday, September 04, 2007 2:59 PM
> *Subject:* RE: [cisco-voip] anyone using VG224 with DC power?
>
>
> http://www.cisco.com/en/US/products/hw/gatecont/ps2250/prod_installation_guide09186a00801d7e59.html#wp1095462
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Lelio Fulgenzi
> *Sent:* Tuesday, September 04, 2007 1:20 PM
> *To:* Cisco VoIPoE List
> *Subject:* [cisco-voip] anyone using VG224 with DC power?
>
>  anyone out there using VG224 with DC power? I'd like to discuss what
> cabling options etc, you used.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070904/d5668a1c/attachment.html