[cisco-voip] CER Default ERL
Joe Pollere (US)
Joe.Pollere at us.didata.com
Fri Sep 7 14:55:01 EDT 2007
I usually use the Security Desk DID Number as the default ERL.
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Friday, September 07, 2007 12:52 PM
To: cisco voip list
Subject: [cisco-voip] CER Default ERL
For those that have setup CER, What do you use for the default ERL?
I have a 13 site School district and one VGW that everything is going
out.
according to the doc's this default gets used when no other ERL is used
or after a reboot until all the switch ports are updated.
Do you just put the School district name and location "unknown" I don't
see this being used but I just want to cover my backside.
Thanks
Scott
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070907/d3d1baef/attachment-0001.html
More information about the cisco-voip
mailing list