[cisco-voip] Phone authentication

Ryan Ratliff rratliff at cisco.com
Tue Sep 11 09:06:29 EDT 2007


 From a configuration standpoint the simplest way to do it for the  
7960 phones is via null string.  This means you won't have to go and  
touch each phone.  For the 7961 no config is necessary, as soon as  
the config is finished on the CM servers they will register in  
authenticated mode.

-Ryan

On Sep 11, 2007, at 2:22 AM, Reto Gassmann wrote:

Hello

We have to setup phone authentication for all of our 4000 IP Phones  
(7960,
7961).
We currently run our Callmanager 4.2(3) without authentication and  
encryption.

Has any one some kind of best practice on how to set this up.  
Especially the
deployment for the phones would be interesting. Te set up for the  
CallManger,
the Certificates and the key pairs for the phones is pretty good  
described from
Cisco.

Thanks for input
Reto




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list