[cisco-voip] Phone authentication

[Reto Gassmann]

Hi Ryan

ist there a Cisco paper discribing this? I assume that I need BAT to configure
the phones.

Thanks for help and feedback
Rto

Zitat von Ryan Ratliff <rratliff at cisco.com>:

>  From a configuration standpoint the simplest way to do it for the  
> 7960 phones is via null string.  This means you won't have to go and  
> touch each phone.  For the 7961 no config is necessary, as soon as  
> the config is finished on the CM servers they will register in  
> authenticated mode.
> 
> -Ryan
> 
> On Sep 11, 2007, at 2:22 AM, Reto Gassmann wrote:
> 
> Hello
> 
> We have to setup phone authentication for all of our 4000 IP Phones  
> (7960,
> 7961).
> We currently run our Callmanager 4.2(3) without authentication and  
> encryption.
> 
> Has any one some kind of best practice on how to set this up.  
> Especially the
> deployment for the phones would be interesting. Te set up for the  
> CallManger,
> the Certificates and the key pairs for the phones is pretty good  
> described from
> Cisco.
> 
> Thanks for input
> Reto
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>