[cisco-voip] Phone authentication
Ryan Ratliff
rratliff at cisco.com
Wed Sep 12 09:07:59 EDT 2007
The security guide or SRND are your best bets.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_2/
sec_vir/ae/sec423/index.htm
http://www.cisco.com/en/US/products/sw/voicesw/ps556/
products_implementation_design_guide_book09186a00806e8a79.html
-Ryan
On Sep 12, 2007, at 7:20 AM, Reto Gassmann wrote:
Hi Ryan
ist there a Cisco paper discribing this? I assume that I need BAT to
configure
the phones.
Thanks for help and feedback
Rto
Zitat von Ryan Ratliff <rratliff at cisco.com>:
> From a configuration standpoint the simplest way to do it for the
> 7960 phones is via null string. This means you won't have to go and
> touch each phone. For the 7961 no config is necessary, as soon as
> the config is finished on the CM servers they will register in
> authenticated mode.
>
> -Ryan
>
> On Sep 11, 2007, at 2:22 AM, Reto Gassmann wrote:
>
> Hello
>
> We have to setup phone authentication for all of our 4000 IP Phones
> (7960,
> 7961).
> We currently run our Callmanager 4.2(3) without authentication and
> encryption.
>
> Has any one some kind of best practice on how to set this up.
> Especially the
> deployment for the phones would be interesting. Te set up for the
> CallManger,
> the Certificates and the key pairs for the phones is pretty good
> described from
> Cisco.
>
> Thanks for input
> Reto
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list