[cisco-voip] how to auto add prefix the to missed calls

[Robert Singleton]

On Tue, 2007-09-11 at 12:13 -0400, Matthew Saskin wrote:
> James,
> 
> You need to add the prefix (91 I'm guessing?) to the calling number on 
> the inbound leg of the call.  Where you do this depends on your 
> environment - could be on the gateway directly (H.323), on the gateway 
> configuration in callmanager (H.323 or MGCP), via translation pattern, etc..
> 
> The downside to this is that the calling number will show the prefix for 
> caller ID, as well as in CDR's, etc.

That's an idea I had not considered, but you're right, it would show
everywhere and complicate CDR analysis, etc...

Our users don't seem to use the feature much, but the ones that do are
fine with hitting EditDial and a '9' before 'Dial'.

Robert