[cisco-voip] BLF CM 5.1.2
Chris D'amore
CDAmore at jackhenry.com
Tue Sep 11 17:58:55 EDT 2007
There is a separate CSS setting called "Subscribe CSS" for the device.
Have you configured this field?
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, September 11, 2007 4:24 PM
To: Bernhard Albler
Cc: cisco voip list
Subject: Re: [cisco-voip] BLF CM 5.1.2
Same Partition and CSS
I read that this might be a bug
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg46354&
Submit=Search
I upgraded to 8.3 firmware and still didn't work and now paging is
screwed up..... I'm down grading to 8.2 to get the paging working again.
Scott
On 9/11/07, Bernhard Albler <balbler at nts.at> wrote:
HI Scott
>I setup the second button as a SD/BLF and I don't get any status on the
>phone that it is set to?
Basically the BLFs are controlled by subscribe Calling Search Spaces.
The DN you want to monitor has to be in the Subscribe CSS of the phone
which has the blf. IF (big if) you are using Extension Mobility, the
Subscribe CSS used is actually controlled by the logged in user, so you
need to check the subscribe CSS of the user.
regards
bernhard
NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
information. Any unauthorized review, use, printing, saving, copying, disclosure
or distribution is strictly prohibited. If you have received this message in error, please immediately
advise the sender by reply email and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070911/34ab726f/attachment.html
More information about the cisco-voip
mailing list