[cisco-voip] BLF CM 5.1.2

[Scott Voll]

Same Partition and CSS

I read that this might be a bug
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg46354&Submit=Search

I upgraded to 8.3 firmware and still didn't work and now paging is screwed
up..... I'm down grading to 8.2 to get the paging working again.

Scott


On 9/11/07, Bernhard Albler <balbler at nts.at> wrote:
>
>  HI Scott
>
> >I setup the second button as a SD/BLF and I don't get any status on the
> >phone that it is set to?
>
> Basically the BLFs are controlled by subscribe Calling Search Spaces. The
> DN you want to monitor has to be in the Subscribe CSS of the phone which has
> the blf. IF (big if) you are using Extension Mobility, the Subscribe CSS
> used is actually controlled by the logged in user, so you need to check the
> subscribe CSS of the user.
>
> regards
> bernhard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070911/1b191f12/attachment-0001.html