[cisco-voip] CCM 5.1(2) Bulk Administration problems - EM fails to hook up on Device profiles

[Kris Seraphine]

I had the same problem in 5.1.1b.  I created dummy phones for all the EM
users using BAT to get the service configured correctly.  I then used the
'Based on devices controlled by users' in BAT to create device profiles for
these users.

The downside to this is that there's no way to limit the scope of the 'Based
on devices controlled by users' job so it will create a device profile for
any existing phone that's associated with a user.

On 9/8/07, Kristján Ólafur Eðvarðsson <kristjan at sensa.is> wrote:
>
> Hi,
>
> Wondering if anyone is sharing my experience.
>
> I´m bulking in about 500 udp profiles. I created a
> UDP template that is subscribed to the Extension Mobility service.
>
> When I start the bulk job everything seems fine. The result is 100%
> success.
> But when looking at services for the profiles it does not get the EM login
> service.
>
> The weird thing is that going back to the UDP Template the login logout is
> gone off.
> I have verified that everything is saved e.t.c. But I see a pattern where
> this service seems to "popp off" when running the bulk job.
>
> Anyone been there ?
>
> I have tried restarting everything, even upgraded to the latest 5.1(2b)
> 3.aug patch.
> But no luck. I didn´t have any of those issues last time when I bulked for
> 5.0.something CCM.
>
> regards. Kristjan Edvardsson
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070912/15c78725/attachment.html