[cisco-voip] Inbound Caller ID NAME

[Robert Kulagowski]

> I was looking through the archives and it seems that to get inbound 
> caller ID NAME to work you MUST:
> 
> 1) Use MGCP
> 2) Enable NI2 protocol
> 
> Is this still the case?  Did I miss anything else?

Check the archives a little more! :)

We just discussed this not too long ago.

You can use H.323: either use the cname tcl script that was written by 
David Zilk or the IOS that has this built-in.  12.4.11XU?