[cisco-voip] Inbound Caller ID NAME
CarlosOrtiz at bayviewfinancial.com
CarlosOrtiz at bayviewfinancial.com
Thu Sep 20 11:04:00 EDT 2007
Can anyone verify Robert's suggested IOS version for inbound Caller ID to
work on H.323? What additional commands on the gateway and Call Mgr
config are needed?
Carlos
Robert Kulagowski <rkulagow at gmail.com>
09/14/2007 11:30 AM
To
CarlosOrtiz at bayviewfinancial.com
cc
cisco-voip at puck.nether.net
Subject
Re: [cisco-voip] Inbound Caller ID NAME
> I was looking through the archives and it seems that to get inbound
> caller ID NAME to work you MUST:
>
> 1) Use MGCP
> 2) Enable NI2 protocol
>
> Is this still the case? Did I miss anything else?
Check the archives a little more! :)
We just discussed this not too long ago.
You can use H.323: either use the cname tcl script that was written by
David Zilk or the IOS that has this built-in. 12.4.11XU?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070920/8331c336/attachment.html
More information about the cisco-voip
mailing list